Dear Car Talk: I have a ’95 Toyota Tacoma pickup truck. It has 152,000 miles on it and four-wheel drive with locking hubs. When I run it in reverse in 4WD high or 4WD low, it seems to bind up. I have changed the fluid in the “pumpkins” and transfer case and have found no metal. Do you have ideas on where I should start? – Michael
Dear Michael: Start at your closest Toyota new-truck showroom.
Actually, my guess is that one or two of your hubs may be binding up. After they get a couple of decades of corrosion on them, they do what they want.
You can test the theory by engaging four-wheel drive, shifting the truck into reverse and putting it up on a lift. My guess is that you’ll see only one of the front wheels turning backward. That means the other wheel is experiencing some resistance.
To find out how much resistance, you’ll need to stop the wheel that’s spinning and force the differential to make the other wheel turn. We usually do that by having the dumbest guy in the shop hang from the spinning wheel. After he goes around a few times and bangs his head on the fender liner, he can sometimes bring that wheel to a stop. And if he wasn’t the dumbest guy in the shop before, he is by then.
A safer approach is to use a 6-foot pry bar and jam it between the fender liner and the tire. If you can’t get the spinning wheel to stop and the other wheel to start turning, then you probably have a sticking hub on the side that’s not turning.
You may be able to take apart the hub and clean it up. So try that before you look for a new one, Michael.
Stop the madness! You can stop driving like a knucklehead, and you’ll help your car in the process. Learn how your driving habits can harm your car in Click and Clack’s pamphlet “Ten Ways You May Be Ruining Your Car Without Even Knowing It!” Send $4.75 (check or money order) to Car Talk/Ruin, 628 Virginia Drive, Orlando, FL 32803.
Have a question about cars? Visit the Car Talk website at cartalk.com.